Most of us want an easy task all the time but that is not the reality for some of us. If you really want an easy task then you need to invest big money to buy an advanced technology to do the work for you or hire professionals. But sometimes you just got to move and do things on your own if you don’t trust other people enough to follow and accomplish what you have in mind. It can also be because you don’t have the budget to hire professionals like laserleveladvisor but you have an access to the necessary tools.
However, it is not that easy to install a cabinet no matter how exciting the job is. Sure, you get to design your own cabinet and you get to choose the best materials that will ensure its durability and long life-span. But without the best tools, materials, and expertise, leveling the cabinet alone requires a lot of time to perfect. Not to mention if your floor is not leveled too. You may not know it yet but not all floors are leveled accurately which may also affect how you level your cabinet.
Thus, it really important that you have a laser level to guide you throughout your work.
Why Do You Need a Laser Level for Installing Cabinets?
If you spent days planning the layout and design of your cabinet, the last thing you want is to see that your cabinets are installed in a wrong way. Believe it or not, it is the most annoying and exhausting sight to see. Good thing our modern world and evolution of technology have led to the creation of the laser levels. Laser levels are the answer to an easier life so you can skip the tiresome process of leveling and installing cabinets.
No need to mess up things. Just set the laser level where you want it to be and turn the switch ON. The laser level will give you the accurate leveling that you need so you can draw some marks on your wall before moving to another location or position. So, read on for the complete guide on how you can install wall cabinets with a laser level below.
- Prepare the Tools and Materials
As mentioned above, having the tools and materials are important to accomplish your work so be sure that you have the following tools that include a tape measure, a traditional bubble level, a screw gun, a stud finder, a pencil, some clamps, and of course a laser level. The laser level can be placed on a tripod or mounted on the wall. When it comes to the materials, be sure that you have some screws, a ledger board, wood shims, and a ready to assemble cabinets.
- Measure and Draw Marks
Measuring and drawing marks can make or break your entire task so be sure to get this done the right way. So, measure and mark the height of the cabinet you need to install before mounting the laser level on the wall. You can also mount the laser level on a tripod and position it a few inches from the wall. Once the laser level is set on your desired height, switch it ON to see its projected laser beam on the wall.
Drawing some line may not be necessary but you can still draw some marks and use the laser level as a guide. Then, locate the studs using the stud finder and mark them to ensure that your cabinets have a solid support.
- Mount the Ledger Board on the Wall
Once you’re done marking out the studs on your wall, you can proceed to mount the ledger board. This serves as the support of your cabinet while you completing the installation process. Thus, the ledger board should be mounted below the cabinet’s base.
Since some of the ready to install cabinets already have an attached hardware and doors, remove the hardware and doors (if there are any) to make it lighter and easier to install.
- Mount the Cabinets
Depending on your desired style and storage needs, you can install a set of cabinets and lift it altogether or install it one by one as single cabinets. You would need a company if you intend to join two or more cabinets together and install it.
Once you have positioned the cabinets on the floor, grab the screw gun and its parts together with screws. There should be one fixed screw at the top and another one at the bottom of the cabinets’ sides. This will ensure you that the cabinets are secure and will not fall apart anytime soon. You may use the laser level or a traditional bubble level to check if the cabinets you just joined are properly leveled.
Then, lift the cabinets carefully and mount them on the wall onto the studs according to your markings and laser beam. Make you already drill the screws through the cabinets with thicker woods beforehand to secure it better. Repeat the steps until you’re done installing all the cabinets.
- Fasten the Cabinet’s Hardware and Doors
Now that you have already secured your cabinets on the wall, it’s time to attach the hardware and doors (if there are any). Attach the hardware and doors on your mounted cabinets then remove the temporary ledger board below that supports the cabinets’ weight.
Obviously, installing cabinets can be a piece of cake as long as you have the best tools and materials. When all the basics are done right from the alignment and leveling of cabinets, it will be easier for you to finish the remaining steps. This brings you back to the measurement and placement of the cabinets. Pay close attention to the screws on top and at the bottom to make sure that your cabinets will not fall apart in front of you.
Don’t forget to focus on the stud points as well as it supports the cabinets’ entire weight. Follow your marks using the laser level to be satisfied with the results.